[JOG SPEED] Area
These settings determine the speed range of the JogDial when
moving a sound point on the graph, or during setup mode. Set the
and before, after, or during any movement. The speed
actions are slow (.5X normal speed) and fast (2X normal speed).
These are only operational when either or
modes are selected.
Output Level Meter
To view all of the bus output levels, display the [METER>BUS/AUX] window.
The meter point reflects the bus output. The [RESPONSE] area selections in
the [METER>BUS/AUX] window permit a response assignment of either
or , which is interlocked with the setup in the [METER] window.
Chapter 8
DA7 Users’ Guide
8
-
11
8
Pan/Assign
Surround
To Next Page
Loading...
