11-2 MIDI, PRG ASGN (Program Assign) Window
Assign scene memory numbers to the change table to be used by the DA7 in
the [PROGRAM CHANGE TABLE] area. This is useful when you are
exchanging existing scene memories for new ones.
To execute , as in calling up a mixed scene, check the
settings on the [MIDI>SETUP] window again.
[PROGRAM CHANGE TABLE] Area
Select a program change table. Rotate the JogDial to select a program
change number from 1 through 128. The initial setting is 1 through 50. [NO
ASSIGN] is set to the scene memories of 51 through 128.
Chapter 11
DA7 Users’ Guide
11
-
6
11
MIDI
PRG ASGN (Program Assign) Window
Program Change Table
To Next Page
Loading...
