When the FADER CONTROL LED button on the Top Panel is pressed (red),
the selected aux channel [FADER CONTROL] windows will be displayed.
These windows show the status and level of the selected aux send
assignments to input channels 1 through 32. The faders will display the
appropriate levels for the selected aux send for each channel.
There are LED field status indicators for AUX 1-6 on each Channel Strip.
When on (green), the channel is routed to the aux send indicated, and there
can be multiple assignments for the channel, displayed on the LED field
above the faders.
The AUTOMATION/AUX button on the Top Panel controls the LED field
status indicators of the Channel Strips. When AUTOMATION is selected for
this button (red), the LED field indicators reflect the automation parameter
assignments for the channels. When AUX is selected for this button (green),
the LED field indicators reflect the auxillary (AUX) routing assingments for
the channels. Pressing the AUTOMATION/AUX button toggles the status
indicators.
Chapter 10
DA7 Users’ Guide
10
-
2
10
AUX
Channel Strip LED Field
Automation/AUX Button
FADER CONTROL Window
To Next Page
Loading...
