[Level Meter] Display
Aux send level meters on the right of the individual channel
areas display the aux send level for the selected channel. All 1
through 32 send levels can be monitored from the [FADER
CONTROL] windows. Moving the fader for the selected channel
will control the send output level of the respective aux send.
Rotating the LEVEL ON/OFF knob will also adjust the selected
level. If the [UTILITY>CONFIG] window [AUTO DISP CHANGE]
item is set to , the LCD display will change to the [CHANNEL]
window when the LEVEL ON/OFF knob is rotated.
Chapter 10
DA7 Users’ Guide
10
-
6
10
AUX
To Next Page
Loading...
