button
The link function joins adjacent channels to create a pair while respecting
the current individual settings, including fader position and value.
button
The stereo function joins adjacent channels to create a stereo pair, and
overwrites the even-numbered channel settings with the current odd-
numbered channel settings for phantom power, phase, gain, aux send, fader
group, mute group, equalizer, dynamics, delay, channel on-off and fader.
Chapter 13
DA7 Users’ Guide
13
-
8
13
Group
In the fader link, you can change the fader position that is linked ,
while pressing the SELECT LED button of that channel.
To Next Page
Loading...
