Or, if you prefer to use an external wordclock reference as the master
wordclock, the external wordclock master must output a sample frequency
that is common to all devices. When you are referencing the DA7 to video,
you should be very careful to set the DA7 up properly.
For additional information about sample frequency and setting the clock rate
of the DA7, see Chapter 12, D-I/O, page 12-2.
The key to getting the most out of your DA7 is to learn it completely. We
strongly recommend that you read at least Chapter 2, DA7 Tour, Chapter 3,
Quick Start, Chapter 4, Cursor Control and become familiar with the
factory default presets in Appendix D.
Chapter 1
DA7 Users’ Guide
1
-
12
1
Introduction
To Next Page
Loading...
