Select a dynamics type
_
Cursor to either the button or the
button in the [FUNCTION] area of the [DYNAMICS]
window, and press the ENTER button.
Either
Adjust the Compressor+Gate
_
The [COMP] area has software control
for [THL] (threshold), [RATIO], [ATK] (attack), [RLS] (release), [GAIN],
and [DLY] (delay). The [GATE] area gives you control over [THL], [ATK] and
[RLS].
Or,
Adjust the Expander
_
This is similar in appearance to the [COMP] area,
except [GAIN] is replaced by [RANGE].
Adjust the Delay
_
This area has two fields for adjustment. The first one
allows you to change the Delay for the selected channel by 1 msec step. The
other allows you to change the Delay for the selected channel by 1 sample
step. You can also enter a number in either field using the numeric keypad.
See Chapter 9, Dynamics / Delay for more details.
To Next Page
Loading...
