Parker AC20 Series - Page 30

DOC-0017-04-EN: AC20 Series - Hardware Installation Manual
30 (154) DOC-0017-04-EN-A 22.03.2023
Frame
Size
AC Line Input
Terminals
(L1/L, L2/N,
L3)
DC Link /
Brake Output
Terminals
(DC+, DC-,
DBR)
Motor Output
Terminals
(U, V, W)
Earth
Terminal
(PE)
Chassis Earth
Clamp
(PE)
6
M8 screw, accepting crimps or lugs up to 20mm wide
(Maximum conductor size 25.0mm
2
)
M6 Fork Crimp
7
M8 screw, accepting crimps or lugs up to 25mm wide
(Maximum conductor size 95.0mm
2
)
M6 Ring Crimp
8
M10 post, accepting crimps or lugs up to 25mm wide
(Maximum conductor size 120.0mm
2
)
M8 Ring Crimp
9
M10 post, accepting crimps or lugs up to 32mm wide
(Maximum conductor size 185.0mm
2
)
M10 Ring
Crimp
10
M12 post, accepting crimps or lugs up to 41mm wide
(Maximum conductor size 240.0mm
2
)
M10 Ring
Crimp
Terminal Block Wire Range (North America)
North American wire sizes (AWG) are based on NEC/NFPA-70 for ampacities of thermoplastic-insulated
(75ºC) copper conductors.
The wire sizes allow for an ampacity of 125% of the rated input and output amperes for motor branch-circuit
conductors as specified in NEC/NFPA-70.
1ø, 230V Products:
Frame
Size
Product Code
Motor
Power
(kW)
AC Line Input
Terminals
(L1/L, L2/N, L3)
Brake Output
Terminals
(DC+, DBR)
Motor Output
Terminals
(U, V, W)
2
Terminal Block Wire Range: 10 – 26 AWG
20G-12-0070...
1.5
12
14
14
20G-12-0100...
2.2
10
14
14
All cable sizes specified in AWG
3ø, 230V Products:
Frame
Size
Product Code
Motor
Power
(kW)
AC Line Input
Terminals
(L1/L, L2/N, L3)
DC Link / Brake
Output
Terminals
(DC+, DC-, DBR)
Motor Output
Terminals
(U, V, W)
2
Terminal Block Wire Range: 10 – 26 AWG
20G-32-0070...
1.5
14
14
14
20G-32-0100...
2.2
14
14
14
3
Terminal Block Wire Range: 10 – 20 AWG
20G-33-0170...
4.0
10
14
10
4
Terminal Block Wire Range: 6 – 20 AWG
20G-34-0210...
5.5
10
14
10
5
Terminal Block Wire Range: 2 – 20 AWG
20G-35-0300...
7.5
8
12
8
20G-35-0400...
11
6
10
8
All cable sizes specified in AWG