Parker NitroFlow HP - Page 18

K3.1.141e Manual NitroFlow HP_EN.doc - 18 -
Default settings software parameters
Menu What Default setting
Logs
Interval 60 min
Local settings
Language English
Local settings
Pressure Bar(g)
Local settings
Flow LPM
Local settings
Purity %O2
Alarm settings
O2 high Active: No
Unit stop: No
Level: 5%
Delay: 30 sec
Alarm settings
O2 low Active: No
Unit stop: No
Level: 0.5%
Delay: 30 sec
Alarm settings
Inlet pressure high Active: No
Unit stop: No
Level: 13 bar(g)
Delay: 30 sec
Alarm settings
Inlet pressure low Active: No
Unit stop: No
Level: 2 bar(g)
Delay: 30 sec
Alarm settings
Outlet pressure high Active: No
Unit stop: No
Level: 10 bar(g)
Delay: 30 sec
Alarm settings
Outlet pressure low Active: No
Unit stop: No
Level: 2 bar(g)
Delay: 30 sec