Parker NitroFlow HP - Identification and Service; Certificates

K3.1.141e Manual NitroFlow HP_EN.doc - 7 -
1.3 Identification and service
The identification plate is located on the back of the
NitroFlow
®
HP. The identification plate shows the
characteristics of the NitroFlow
®
HP.
For service and technical assistance, please contact
our local representative or:
PARKER FILTRATION & SEPARATION
Hermitage Court, Hermitage Lane,
Maidstone, Kent ME16 9NT
England
Tel: (+44) 1622 7233 00
Fax: (+44) 1622 7287 03
1.4 Certificates
The NitroFlow
®
HP meets with the following requirements:
Subject Applicable standard
Directive for electromagnetic
compatibility (EMC)
EN 61326 (1997) + A1 (1998) + A2
(2001) + A3 (2003)
EN 61000-3-2 (2000)
EN 61000-3-3 (1995) + A1(2001)
Low Voltage Directive NEN-IEC 60204-1(1997)
Pressure equipment directive (PED) Sound engineering practice
Quality assurance ISO 9001:2000
Environmental care ISO 14001:2004
Fig. 1-1: Identification plate