Parker NitroFlow HP - Use in Accordance with Purpose; User Instructions; Liability

K3.1.141e Manual NitroFlow HP_EN.doc - 8 -
1.5 Use in accordance with purpose
The NitroFlow
®
HP is intended to make nitrogen out of normal ambient air. The
system is based on gas separation membranes. Each different or further use will not
be in conformity with the purpose. Parker Filtration & Separation B.V. will not accept
any liability for improper use.
The NitroFlow
®
HP is in compliance with the prevailing directives and standards.
Only use this NitroFlow
®
HP in a technically perfect condition, in conformity with the
purpose as described above.
1.6 User instructions
Only well-trained personnel are allowed to work on the NitroFlow
®
HP. The user
must be aware of hazards related to operating the NitroFlow
®
HP and processes
connected to the NitroFlow
®
HP. The user is responsible for the safety of the
personnel. All personnel working on the NitroFlow
®
HP must have free access to the
applicable manuals.
1.7 Liability
Parker Filtration & Separation B.V. will not accept any liability in case:
• The instructions in this manual are ignored.
• Replacement parts are used which are not approved by the manufacturer.
• The NitroFlow
®
HP is operated incorrectly.
• The system is fed with other gasses than air.
• The NitroFlow
®
HP is modified without notification and authorization of the
manufacturer.
• Maintenance and repair are not carried out according to the instructions.