Parker Sporlan S3C - 13 Lighting Configuration; Lights Constant on; One Day Lighting Schedule; Seven Day Lighting Schedule

Page 112 – Bulletin 100-50-9.1
13. LIGHTING CONFIGURATION
The S3C offers three case lighting options; Constant
On, Simple One Day Schedule and a Full Custom 7 Day
Schedule. In addition to the schedules, an optional
occupancy sensor is available that will dim lighting when
motion is not detected near the refrigerated display case.
The dimming feature is only active during scheduled “on
times”. An external LED driver that supports 0 to 10VDC
signal is required when the dimming feature is used. See
below for configuration.
13.1 LIGHTS CONSTANT ON
1. From the default display, press the  button. e
display will show   .
2. Use the ▲▼ buttons to enter the administrator
password and press SET.
3. e display will show ; press SET.
4. Press the ▲ button to scroll to the (light
conguration menu); press SET.
5. Scroll to h(schedule type); press SET.
6. Scroll to o; press SET.
7. Press the ESC button 3 times to revert to the default
display.
13.2 ONE DAY LIGHTING SCHEDULE
1. From the default display, press the  button. e
display will show   .
2. Use the ▲▼ buttons to enter the administrator
password and press SET.
3. e display will show ; press SET.
4. Press the ▲ button to scroll to the (light
conguration menu); press SET.
5. Scroll to h(schedule type); press SET.
6. Scroll to 1d; press SET.
7. Press the ▲ button to scroll to the oe(on time); press
SET.
8. Use the ▲▼ buttons to scroll to the time the lights turn
on (in 24 hour time); press SET.
9. Press the ▲ button to scroll to the ofe(o time); press
SET.
10. Use the ▲▼ buttons to scroll to the time the lights turn
o (in 24 hour time); press SET.
11. Press the ESC button 3 times to revert to the default
display.
13.3 SEVEN DAY LIGHTING SCHEDULE
1. From the default display, press the  button. e
display will show   .
2. Use the ▲▼ buttons to enter the administrator
password and press SET.
3. e display will show ; press SET.
4. Press the ▲ button to scroll to the (light
conguration menu); press SET.
5. Scroll to h(schedule type); press SET.
6. Scroll to 7d; press SET.
7. Press the ▲ button to scroll to each day and set on
time and o time (in 24 hour time); press SET. Use the
following chart to congure the custom 7 day schedule:
8. Press the ESC button 3 times to revert to the default
display.
Display Meaning Description
o
Monday on time Lights will come on at this time on Monday
Mof
Monday off time Lights will turn off at this time on Monday
u
Tuesday on time Lights will come on at this time on Tuesday
uf
Tuesday off time Lights will turn off at this time on Tuesday
e
Wednesday on time Lights will come on at this time on Wednesday
ef
Wednesday off time Lights will turn off at this time on Wednesday
h
Thursday on time Lights will come on at this time on Thursday
hf
Thursday off time Lights will turn off at this time on Thursday
f
Friday on time Lights will come on at this time on Friday
ff
Friday off time Lights will turn off at this time on Friday

Saturday on time Lights will come on at this time on Saturday
f
Saturday off time Lights will turn off at this time on Saturday
u
Sunday on time Lights will come on at this time on Sunday
uf
Sunday off time Lights will turn off at this time on Sunday