pellenc C45 - Page 30

PRUNING SHEARS C45, C45-P150, C45-P200
163529-D
5.6.3.2.CHANGEOF"FUNCTIONAL"SETTINGSMODE
1. Connect the tool to the battery.
See 4.7. Connecting the tool to the ULIB 150P and 250 batteries, page 17.
2. Turn on the battery.
See the operating instructions for the battery.
3. On the battery, select the mode by pressing "+" or "-",
4. Press the "mode" button to validate.
5. Press "+" or "-" to adjust the setting from 1 to 9, see 5.6.3.1. Presentation of the "functional" setting modes,
page 29.
6. Press the "mode" button to validate.
30