Pentair Riversoft - Drain Line Flow Controller

Installer Manual Riversoft - Installation
38 / 90 Ref. MKT-IM-045 / A - 13.03.2020
4.6. Drain line flow controller
The DLFC requires assembly before use.
NOTE
The plumbing connectors should not be installed. See 4.5.6.2 Bypassing, page 35.
A Using a PTFE (plumber’s tape), wrap it over threads of the flow controller (2).
B Screw the flow controller (2) and the 90° elbow (1) together (hand tighten).
C Place the ball (5) into the flow controller (2) and insert the assembly into the drain line
opening (4).
D Push the assembly in and secure with the drain line clip (3).