Pentair Riversoft - Calendar Override Setting; System Selection; Startup

Installer Manual Riversoft - Description
Ref. MKT-IM-045 / A - 13.03.2020 17 / 90
3.2.2. Performance flow rate characteristics
NOTE
Flow rates are indicative data. Maximum flow rate to produce in order to respect the
required service velocity for an optimal ion exchange upon resin manufacturers
recommendation, regardless of the inlet pressure.
Softening
Number of people................................... POU*................ 1-2 ....................3-4.................... 5-8
* assuming a 200L per day water consumption at POU (Point Of Use).
Capacity & salt consumption for the different salt dosage setting
Softener
Riversoft
4
8 15 30
Nominal (residual hardness 0 mg/L as CaCO
3
)
[m
3
/h]
0.2 0.5 0.9 1.8
Nominal (residual hardness 50-100 mg/L as
CaCO
3
) [m
3
/h]
0.3 0.6 1.1 2.2
Peak (residual hardness mg/L as CaCO
3
) [m
3
/h]
0.4 0.8 1.5 3.0
Softener Riversoft 4 Riversoft 8
Corresponding salt dosage (g/L of resin) 80 120 200 80 120 200
Salt amount per regen (kg) 0.3 0.5 0.8 0.6 0.9 1.6
Capacity (kg as CaCO
3
)
0.16 0.2 0.24 0.32 0.4 0.5
Capacity in m
3
(for 300ppm inlet hardness and
100ppm residual hardness)
0.79 0.98 1.22 1.60 1.98 2.48
Estimated salt consumption per year (kg) for 200 L
daily water consumption per person and 300 mg/L
as CaCO
3
inlet hardness, residual 100 mg/L as
CaCO
3
28.8 34.9 46.6
14.2 -
28.4
17.2 -
34.5
23 - 46
Softener Riversoft 15 Riversoft 30
Corresponding salt dosage (g/L of resin) 80 120 200 80 120 200
Salt amount per regen (kg) 1.2 1.8 3.0 2.4 3.6 6
Capacity (kg as CaCO
3
)
0.6 0.75 0.93 1.21 1.49 1.86
Capacity in m
3
(for 300ppm inlet hardness and
100ppm residual hardness)
3.02 3.74 4.67 6.03 7.45 9.31
Estimated salt consumption per year (kg) for 200 L
daily water consumption per person and 300 mg/L
as CaCO
3
inlet hardness, residual 100 mg/L as
CaCO
3
45.8 -
61
55.5 -
74
74.1 -
98.8
86.6 -
115.5
105.1 -
140.1
145.9 -
233.5