Installer Manual Riversoft - Installation
42 / 90 Ref. MKT-IM-045 / A - 13.03.2020
4.6.4. Electrical connection
4.6.4.1 Softener connection
NOTE
Use the fairlead (1)to block the power supply cable and prevent accidental disconnection.
4.6.4.2 Meter connection
NOTE
During shipping, the cable from the back of the controller to the meter assembly may have
been disconnected. If it has, insert the end of the cable into the top of the meter assembly
(1).
Power supply
Power supply
Bypass configuration
Manifold configuration
To Next Page
Loading...
