Pentair Riversoft - Commands

Installer Manual Riversoft - Programming
Ref. MKT-IM-045 / A - 13.03.2020 45 / 90
5.2. Commands
1. Camshaft indicator
A column of windows provides a visual indicator of the camshaft
rotation.
2. - Manual
regeneration button
The manual regeneration button when pressed initiates either a
delayed regeneration or immediate regeneration.
3. Display
Used to show informations, see 5.1. Display, page 44.
4. - Time button
The time button when pressed will display the current hour of day for
5 seconds.
Also used to change the time of day, see page 46.
5. - Salt button
The salt button when pressed will display the current salt setting for
5 seconds.
Also used to change the brine dosage, see page 47.
6. - Hardness
button
The hardness button when pressed will display the current hardness
setting for 5 seconds.
Also used to change the volumetric regeneration, see page 47.