Pentair Riversoft - Page 85

Installer Manual Riversoft - Spare parts
Ref. MKT-IM-045 / A - 13.03.2020 85 / 90
6 3022012 Top plate 1
7 1235373 Module, sensor, photo interrupter 1
8 1234170 Top plate screw no 8 x 9/16” 10
9 3022017 Spring, top plate 1
10 3022014 Camshaft, 7 cycle 1
11 1000589 Pillow block cap 1
12 3026537 12 volt motor/cable assembly 1
13 4001738 606 controller for use with 0.14 gpm BLFC 1
- 4001742 606 controller for use with 0.33 gpm BLFC 1
14 1000269 Injector cap assembly 1
15 - Injector/screen assemblies -
- 3025326 “E” injector, yellow, 6" tank 1
- 3025327 “F” injector, peach, 7" tank 1
- 3025328 “G” injector, tan, 8" tank 1
- 3025329 “H” injector, lt purple 9" tank 1
- 4000880 "J" injector, lt blue 10" tank 1
16 - Assembly refill flow controller -
- 1000221 Assembly refill flow controller 0.14 gpm 1
- 1243510
Assembly refill controller - 0.33 gpm (required with
1030502)
1
- 1030502
Ball, brine-backwash, 0.557” diameter (required with
1243510)
1
17 1232370 O-ring, riser 1
18 1010154 O-ring, tank 1
19 - Kit, drain line flow controller ½” BSPT/ball -
- 3031526 Kit DLFC ½" BSPT #6 1
- 3031527 Kit DLFC ½" BSPT #7 1
- 3031528 Kit DLFC ½" BSPT #8 1
- 3031529 Kit DLFC ½" BSPT #9 1
20 3027839 Meter assembly 1
21 3027837 Meter cable 1
22 3038447 Label, locking bar warning 1
Item Part number Description
Packaging
quantity