Pentax K-1 User Manual

5
Sharing
90
Connect the camera and a communication device via Wi-Fi, and
start Image Sync installed on the communication device.
1 Set the wireless LAN (Wi-Fi) function to ON on
the communication device.
2 Start Image Sync on the communication device.
The camera selection screen appears on the
communication device.
3 Tap [PENTAX K-1].
The [Choose a Network] screen
appears on the communication
device.
4 Tap [PENTAX_xxxxxx] in
the [Network List].
The [Enter Password] screen
appears.
5 Enter the password, and
tap [Connect].
A Wi-Fi connection is established
between the camera and the
communication device.
The list of images appears on the
Image Sync screen.
t Memo
• Refer to [Communication Info] in [Wi-Fi] of the D2 menu for
the default password. (p.89)
Connecting the Camera and a Communication
Device
When an Android Device is Used

Pentax K-1 Specifications

General

Sensor	CMOS
ISO Range	100-204800
Autofocus Points	33
Image Processor	PRIME IV
Viewfinder	Optical (pentaprism)
Video Resolution	Full HD 1080p
Weather Sealing	Yes
Battery Life	760 shots
Camera Type	DSLR
Sensor Size	35.9 x 24 mm
Image Sensor Format	Full Frame
Image Stabilization	Sensor-shift
Continuous Shooting	4.4 fps
LCD Screen Size	3.2 inches
LCD Screen Resolution	1, 037, 000 dots
Battery	D-LI90
Dimensions	136.5 x 110 x 85.5 mm
GPS	Yes
Wi-Fi	Yes
Screen	3.2-inch tilting LCD
Weight	1010g
Shutter Speed	1/8000 to 30 sec
Viewfinder Type	Optical (pentaprism)
Storage Media	SD/SDHC/SDXC