Pentax K-1 User Manual

5
Sharing
91
1 Set the wireless LAN (Wi-Fi) function to ON on
the communication device.
2 Tap [PENTAX_xxxxxx] in the list of detected Wi-
Fi networks.
3 Enter the password, and
tap [Join].
A Wi-Fi connection is established
between the camera and the
communication device.
4 Start Image Sync on the communication device.
Image Sync is started, and the list of images appears.
Flick left or right on the screen to change screens.
t Memo
• You can change operation modes also by tapping the buttons
displayed at the bottom of each screen.
When an iOS Device is Used
Screens of Image Sync
Application image list Camera image list
A mode

Pentax K-1 Specifications

General

Sensor	CMOS
ISO Range	100-204800
Autofocus Points	33
Image Processor	PRIME IV
Viewfinder	Optical (pentaprism)
Video Resolution	Full HD 1080p
Weather Sealing	Yes
Battery Life	760 shots
Camera Type	DSLR
Sensor Size	35.9 x 24 mm
Image Sensor Format	Full Frame
Image Stabilization	Sensor-shift
Continuous Shooting	4.4 fps
LCD Screen Size	3.2 inches
LCD Screen Resolution	1, 037, 000 dots
Battery	D-LI90
Dimensions	136.5 x 110 x 85.5 mm
GPS	Yes
Wi-Fi	Yes
Screen	3.2-inch tilting LCD
Weight	1010g
Shutter Speed	1/8000 to 30 sec
Viewfinder Type	Optical (pentaprism)
Storage Media	SD/SDHC/SDXC