70
Basic Operations
3
4
Push down on the portion
indicated in the illustration to
retract the built-in flash.
1
Press the K/i button.
The built-in flash pops up and begins
charging. The b mode is used regardless
of the flash mode settings. When the flash
is fully charged, b appears in the
viewfinder. (p.30)
2
Press the shutter release button fully.
The flash discharges and the picture is taken.
3
Push the built-in flash down to retract.
Switch between C (Auto Flash Discharge) and b (Manual Flash Discharge)
by pressing the K/i button while the built-in flash is popped up.
Using Manual Flash Discharge Mode
b
,
D
To Next Page
Loading...
