Pentax Optio I-10 - Page 113

111
3
Taking Pictures
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [White
Balance].
3 Press the four-way controller (5).
The [White Balance] screen appears.
4 Use the four-way controller
(23) to change the setting.
You can check the results of selected
white balance settings on the preview
image each time you press the four-
way controller (23).
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture status.
Refer to the section “To Set the White Balance Manually” for
instructions on adjusting the white balance manually.
If you change the [White Balance] setting frequently, you can save time
by assigning it to the Green button (p.120).
Saving the White Balance setting 1p.128
OK
OK
OK
OK
MENU
MENU
Cancel
Cancel
Auto
Auto
OK
OK
MENU
Cancel
White Balance
Auto