117
3
Taking Pictures
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
3
Use the four-way controller
(45) to select O or P.
O Instant Review is displayed.
P Instant Review is not
displayed.
4
Press the 3 button.
The camera returns to capture status.
You can give the image sharp or soft outlines.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sharpness].
Setting the Instant Review
Instant Review 1p.67
If the Blink Detection function worked when shooting, the message
[Closed eyes have been detected] appears for 3 seconds during Instant
Review.
Setting the Image Sharpness (Sharpness)
Rec. Mode
2/3
MENU
Exit
Instant Review
Movie
D-Range Setting
Blink Detection
Digital Zoom
Shake Reduction
To Next Page
Loading...
Need help?
General
