214
8
Connecting to a Computer
Setting Up Your Computer
By installing the software included on the provided CD-ROM on your
computer and connecting the camera to your computer with the USB
cable, you can transfer images and movies captured with your camera
to the computer and then display and manage them. This section
explains how to install the provided software and the other necessary
preparations for enjoying the captured pictures and movies on your
computer.
The following software is included in the provided CD-ROM (S-SW102).
• Image viewing/managing/editing software “MediaImpression 2.0
for PENTAX”
(12 languages: English, French, German, Spanish, Portuguese,
Italian, Dutch, Swedish, Russian, Chinese [traditional and simplified],
Korean, and Japanese)
The following system requirements must be met for you to fully enjoy the
images and movies captured with the camera on your computer.
Provided Software
It is recommended to use the optional AC adapter kit K-AC92 when the
camera is connected to a computer (p.35). If the battery runs out of
power while images are being transmitted to a computer, the data may
be lost or damaged.
System Requirements
To Next Page
Loading...
Need help?
General
