Pentax Optio I-10 - Registering the Subscreen Image (Subscreen Input)

208
7
Settings
4 Use the four-way controller
(23) to select the time until
the camera turns off
automatically.
Choose from [5min.], [3min.] or [Off].
5 Press the 4 button.
The setting is saved.
You can choose the subscreen image displayed on the upper-left corner
of the display.
- One of the 3 pre-installed screens
- One of your own images (compatible images only)
1 In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2 Use the four-way controller
(2345) to select D
(Subscreen Input).
3 Press the 4 button.
The image selection screen appears.
• Auto Power Off does not function in the following situations:
- While recording sound in Voice Recording mode
- While taking pictures in j (Continuous Shooting) mode
- While recording a movie
- During a slideshow or movie/sound playback
- While the camera is connected to a computer
- While images are being transferred in Eye-Fi communication.
Registering the Subscreen Image
(Subscreen Input)
MENU
NTSC
MSC
Off
3min.
5min.
Setting
2/3
Cancel
Power Saving
Auto Power Off
Video Out
Brightness Level
Eye-Fi
USB Connection
OK
OK
Set to display the
selected image on
shooting screen
Subscreen Input
OK
OK
MENU
Cancel
1/2