205
7
Settings
You can automatically transfer images or movies to a computer or similar
devices via wireless LAN using a commercially available Eye-Fi card.
For details on transferring images, refer to “Transferring Images Using
an Eye-Fi Card” (p.237). The default setting is P (Off).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Eye-Fi].
3
Use the four-way controller
(2345) to select O or P.
O Turns on communication using
an Eye-Fi card
P Turns off communication using
an Eye-Fi card
4
Press the 4 button.
The setting is saved.
Depending on the country or region, images and sound files may fail to
be played back if the video output format is set differently from the one
in use there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.155
Video output format of each city 1p.251
Setting the Eye-Fi Communication
• To establish an Eye-Fi communication, you first have to specify a
wireless LAN access point and transfer destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual
supplied with the Eye-Fi card.
• The Eye-Fi setting returns to the default setting when the camera is
turned off.
MENU
MSC
NTSC
Setting
2/3
Cancel
Power Saving
Auto Power Off
5sec.
Video Out
Brightness Level
Eye-Fi
3min.
USB Connection
OK
OK
To Next Page
Loading...
Need help?
General
