126
3
Taking Pictures
3
Press the four-way controller (5).
The [Movie] screen appears.
4
Use the four-way controller (23) to select [Recorded
Pixels].
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller
(23) to change the number of
recorded pixels and frame
rate.
7
Press the 4 button.
The setting is saved.
8
Press the 3 button twice.
The camera returns to capture status.
In C mode, you can correct camera shake while you are recording a
movie with the Movie SR (Movie Shake Reduction) function.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Movie].
3
Press the four-way controller (5).
The [Movie] screen appears.
4
Use the four-way controller (23) to select [Movie SR].
Setting the Movie SR (Movie Shake Reduction)
Function
MENU
Cancel
Rec. Time
02:26
Recorded Pixels
Movie SR
OK
OK
To Next Page
Loading...
Need help?
General
