115
3
Taking Pictures
This specifies whether Blink Detection function works when you use the
Face Detection function. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Blink
Detection].
3
Use the four-way controller
(45) to select O or P.
O Blink Detection function works.
P Blink Detection function does
not work.
The setting is saved.
4
Press the 3 button.
The camera returns to capture status.
• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944)/W (2592×1464).
• When set to 9 (Green) or C (Movie) mode, only Auto (sensitivity 80
- 800) is available.
• When set to c (Digital SR) mode, only Auto (sensitivity 80 - 6400) is
available.
• When set to S (Fireworks) mode, the sensitivity is fixed at its
minimum setting.
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.120).
Saving the Sensitivity setting 1p.128
Setting Blink Detection
Blink Detection 1p.67
Rec. Mode
2/3
MENU
Exit
Instant Review
Movie
D-Range Setting
Blink Detection
Digital Zoom
Shake Reduction
To Next Page
Loading...
Need help?
General
