Pentax Optio I-10 - Connecting to a Windows PC; Connecting the Camera and Your Windows PC

221
8
Connecting to a Computer
Connecting to a Windows PC
Connect your camera to the Windows PC using the provided USB cable
(I-USB7).
1 Turn your Windows PC on.
2 Turn your camera off.
3 Connect your camera to the Windows PC using the USB
cable.
Connect the terminal of the USB cable with arrow mark facing the
front side of the camera.
4 Turn your camera on.
The “AutoPlay” screen appears.
If the “AutoPlay” screen does not appear, follow the steps in “When the
“AutoPlay” Screen Does Not Appear” (p.223).
Connecting the Camera and Your Windows PC
The self-timer lamp blinks while the camera is connected to a Windows
PC.