Pentax Optio I-10 - Monitor Indications

20
The display shows information such as the shooting conditions in the
capture mode. The display changes in the following sequence each time
you press the 4/W button: “Normal Display”, “Histogram +
Info”, “No Info” and “Simple Display + Subscreen”.
Monitor Indications
Display in A Mode
When the shooting mode is set to 9
(Green) mode, the monitor display is
as shown on the right. You cannot
change the information on the display
by pressing the 4/W button
(p.74).
02/02/'10
02/02/'10
14:25
14:25
02/02/'1038
38
14:25
38
ISO
ISO
200
200
AWB
AWB
ISO
200 AWB
12
12 M
12 M
OK
OK
OK
OK
Histogram + Info
No Info
Normal Display
Simple Display +
Subscreen
38