75
3
Taking Pictures
1
Press the Green button in A
mode.
The camera switches to 9 mode.
Press the Green button again to
return to the status before 9 mode
was selected.
When the camera detects a person’s
face, the Face Detection function is activated and the face detection
frame appears (p.70).
2
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
• Assign 9 mode to the [Green Button] on the [A Rec. Mode] for using
9 mode (p.121). The default setting is 9 mode.
•In 9 mode, you cannot change the information on the display by
pressing the 4/W button.
• If you press the 3 button in 9 mode, the [W Setting] menu
appears. The [A Rec. Mode] menu cannot be displayed.
• When the camera is turned off in 9 mode, it turns on in 9 mode next
time the power switch is pressed.
Shutter release
button
Green button
38
To Next Page
Loading...
Need help?
General
