peplink ONE One - Per­user Bandwidth Control; High Availability Via VRRP


4.3 PerUserBandwidthControl

Withperuserbandwidthcontrol,youcandefinebandwidthcontrolpoliciesforupto3groupsofusersto
preventnetworkcongestion.DefinegroupsbyIPaddressandsubnet,andsetbandwidthlimitsforevery
userinthegroup.

4.4 HighAvailabilityviaVRRP

Whenyourorganizationhasacorporaterequirementdemandingthehighestavailabilitywithnosingle
pointoffailure,youcandeploytwoPeplinkroutersinHighAvailabilitymode.WithHighAvailabilitymode,
theseconddevicewilltakeoverwhenneeded.

https://www.peplink.com
17
Copyright@2019Peplink
