peplink ONE One - AP > Profiles



RADIUSServerSettings
Host
EntertheIPaddressoftheprimaryRADIUSserverand,ifapplicable,the
secondaryRADIUSserver.
Secret
EntertheRADIUSsharedsecretfortheprimaryserverand,ifapplicable,the
secondaryRADIUSserver.
Authentication
Port
Infield,entertheUDPauthenticationport(s)usedbyyourRADIUSserver(s)orclick
theDefaultbuttontoenter1812.
AccountingPort
Infield,entertheUDPaccountingport(s)usedbyyourRADIUSserver(s)orclick
theDefaultbuttontoenter1813.
NASIdentifier
ChoosebetweenDeviceName,LANMACaddress,DeviceSerialNumberand
CustomValue

15.1.3 AP>Profiles



APSettings
APProfileName
ApProfilename
SSID
Youcanselectthewirelessnetworksfor2.4GHzor5GHzseparatelyforeachSSID.
Operating
Country
Thisdropdownmenuspecifiesthenational/regionalregulationswhichtheWiFiradio
shouldfollow. 
● IfaNorthAmericanregionisselected,RFchannels1to11willbeavailable
andthemaximumtransmissionpowerwillbe26dBm(400mW). 
● IfEuropeanregionisselected,RFchannels1to13willbeavailable.The
maximumtransmissionpowerwillbe20dBm(100mW).
NOTE:Usersarerequiredtochooseanoptionsuitabletolocallawsandregulations.
Preferred
Frequency
Indicatethepreferredfrequencytouseforclientstoconnect.


https://www.peplink.com
176
Copyright@2019Peplink
