peplink ONE One - Network Settings (Common Settings) 7


DHCPRelaySettings
DHCPRelay
EntertheaddressoftheDHCPserverhere.DHCPrequestswillberelayedtoit.
DHCPServer
IPAddress
DHCPrequestsfromtheLANarerelayedtotheenteredDHCPserver.
ForactivepassiveDHCPserverconfigurations,enteractiveandpassiveDHCPserverIPs
intotheDHCPServer1andDHCPServer2fields.
DHCPOption
82
Thisfeatureincludesdeviceinformationasrelayagentfortheattachedclientwhen
forwardingDHCPrequestsfromaDHCPclienttoaDHCPserver.DeviceMACaddressand
networknameareembeddedtocircuitIDandRemoteIDinoption82.
DHCPRelay
Logging
CheckthisboxtologDHCPrelayactivity.

12.2.2 NetworkSettings(CommonSettings)


StaticRouteSettings
StaticRoute
ThistableisfordefiningstaticroutingrulesfortheLANsegment.Astaticrouteconsistsof
thenetworkaddress,subnetmask,andgatewayaddress.Theaddressandsubnetmask
valuesareinw.x.y.zformat.
ThelocalLANsubnetandsubnetsbehindtheLANwillbeadvertisedtotheVPN.Remote
routessentovertheVPNwillalsobeaccepted.AnyVPNmemberwillbeabletorouteto
thelocalsubnet.Click tocreateanewroute.Click toremovearoute.
EntriesinthislistwillallowtraffictoroutetoadifferentsubnetthatisconnectedtotheLAN
interface.Anytrafficdestinedforanetwork/maskpairwillbedirectedtothecorresponding
gatewayinsteadofroutedthroughWANs.



Incaseofanetworkaddressconflictwithremotepeers(i.e.PepVPN/IPsecVPN/IPForwardingWAN

https://www.peplink.com
75
Copyright@2019Peplink
