peplink ONE One - Bandwidth Allowance Monitor Settings; Additional Public IP Settings


BandwidthAllowanceMonitorSettings

BandwidthAllowanceMonitor
Action
IfEmailNotificationisenabled,youwillbenotifiedbyemailwhenusagehits75%and
95%ofthemonthlyallowance.
IfDisconnectwhenusagehits100%ofmonthlyallowanceischecked,thisWAN
connectionwillbedisconnectedautomaticallywhentheusagehitsthemonthlyallowance.
Itwillnotresumeconnectionunlessthisoptionhasbeenturnedoffortheusagehasbeen
resetwhenanewbillingcyclestarts.
StartDay
Thisoptionallowsyoutodefinewhichdayofthemontheachbillingcyclebegins.
Monthly
Allowance
ThisfieldisfordefiningthemaximumbandwidthusageallowedfortheWANconnection
eachmonth.

Disclaimer
Duetodifferentnetworkprotocoloverheadsandconversions,theamountofdatareportedbythisPeplinkdevice
isnotrepresentativeofactualbillabledatausageasmeteredbyyournetworkprovider.Peplinkdisclaimsany
obligationorresponsibilityforanyeventsarisingfromtheuseofthenumbersshownhere.

AdditionalPublicIPSettings


https://www.peplink.com
68
Copyright@2019Peplink
