EasyManua.ls Logo

peplink ONE One - Page 67

peplink ONE One
249 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OtherHealthCheckSettings
Timeout
Thissettingspecifiesthetimeoutinsecondsforping/DNSlookuprequests.Thedefault
timeoutis5seconds.
HealthCheck
Interval
ThissettingspecifiesthetimeintervalinsecondsbetweenpingorDNSlookuprequests.
Thedefaulthealthcheckintervalis5seconds.
HealthCheck
Retries
Thissettingspecifiesthenumberofconsecutiveping/DNSlookuptimeoutsafterwhichthe
PeplinkBalancewilltreatthecorrespondingWANconnectionasdown.Defaulthealth
retriesissetto3.UsingthedefaultHealthRetriessettingof3,thecorrespondingWAN
connectionwillbetreatedasdownafterthreeconsecutivetimeouts.
Recovery
Retries
Thissettingspecifiesthenumberofconsecutivesuccessfulping/DNSlookupresponses
thatmustbereceivedbeforethePeplinkBalancetreatsapreviouslydownWANconnection
asupagain.Bydefault,RecoverRetriesissetto3.Usingthedefaultsetting,aWAN
connectionthatistreatedasdownwillbeconsideredasupagainuponreceivingthree
consecutivesuccessfulping/DNSlookupresponses.
Note
IfaWANconnectiongoesdown,alloftheWANconnectionsnotsetwithaConnectionTypeofAlwaysonwill
alsobebroughtupuntilanyoneofhigherpriorityWANconnectionsisupandfoundtobehealthy.Thisdesigncould
increaseoverallnetworkavailability.
Forexample,ifWAN1,WAN2,andWAN3haveconnectiontypesofAlwayson,BackupPriorityGroup1,and
BackupPriorityGroup2,respectively,whenWAN1goesdown,WAN2andWAN3willtrytoconnect.IfWAN3is
connectedfirst,WAN2willstillbekeptconnecting.IfWAN2isconnected,WAN3willdisconnectorstopconnecting.
AutomaticPublicDNSServerCheckonDNSTestFailure
WhenthehealthcheckmethodissettoDNSLookupandchecksfail,theBalancewillautomaticallyperformDNS
lookupsonsomepublicDNSservers.Ifthetestsaresuccessful,theWANmaynotbedown,butratherthetarget
DNSservermalfunctioned.Youwillseethefollowingwarningmessageonthemainpage:
https://www.peplink.com
67
Copyright@2019Peplink

Table of Contents

Related product manuals