peplink ONE One - Port Settings


WANDefault
Gateway
EntertheWANrouter'sIPaddressinthisfield.Iftherearemorehostsinadditiontothe
routerontheWANsegment,clickthe buttonnextto“WANDefaultGateway”andcheck
theIhaveotherhost(s)onWANsegmentboxandentertheIPaddressofthehoststhat
needtoaccessLANdevicesorbeaccessedbyothers.
WANDNS
Servers
EntertheselectedWAN'scorrespondingDNSserverIPaddresses.
A
Advancedfeature,pleaseclickthe buttononthetoprighthandcornertoactivate.



12.2.3 PortSettings
Toconfigureportsettings,navigatetoNetwork>PortSettings



Thissectionallowsyouto:

● enableordisablespecificLANports
● ConfigurethenegotiationspeedoftheLANports
● Configuretheporttype(TrunkorAccess)
● AssignaVLANtoaLANport(inAccessmode)


https://www.peplink.com
81
Copyright@2019Peplink
