peplink ONE One - System Tab; System; Admin Security


16 SystemTab
16.1 System
16.1.1 AdminSecurity
Therearetwotypesofuseraccountsavailableforaccessingthewebadmin:adminanduser.They
representtwouserlevels:theadminlevelhasfulladministrativeaccess,whiletheuserlevelisreadonly.
Theuserlevelcanaccessonlythedevice'sstatusinformation;userscannotmakeanychangesonthe
device.
AwebloginsessionwillbeloggedoutautomaticallywhenithasbeenidlelongerthantheWebSession
Timeout.Beforethesessionexpires,youmayclicktheLogoutbuttoninthewebadmintoexitthe
session.
0hours0minutessignifiesanunlimitedsessiontime.Thissettingshouldbeusedonlyinspecial
situations,asitwilllowerthesystemsecuritylevelifusersdonotlogoutbeforeclosingthebrowser.The
defaultis4hours,0minutes.

Forsecurityreasons,afterloggingintothewebadminInterfaceforthefirsttime,itisrecommendedto
changetheadministratorpassword.Configuringtheadministrationinterfacetobeaccessibleonlyfrom
theLANcanfurtherimprovesystemsecurity.Administrativesettingsconfigurationislocatedat
System>AdminSecurity.

https://www.peplink.com
188
Copyright@2019Peplink
