peplink ONE One - DNS Settings



UPnP/NATPMPSettings
UPnPandNATPMParenetworkprotocolswhichallowacomputerconnectedtotheLANportto
automaticallyconfiguretheroutertoallowpartiesontheWANporttoconnecttoitself.Thatway,the
processofinboundportforwardingbecomesautomated.
Whenacomputercreatesaruleusingtheseprotocols,thespecifiedTCP/UDPportofallWAN
connections'defaultIPaddresswillbeforwarded.
Checkthecorrespondingbox(es)toenableUPnPand/orNATPMP.Enablethesefeaturesonlyifyou
trustthecomputersconnectedtotheLANports.

Whentheoptionsareenabled,atablelistingalltheforwardedportsunderthesetwoprotocolscanbe
foundatNetwork>Services>UPnP/NATPMP.

12.5.3 DNSSettings
ThebuiltinDNSserverfunctionalityofthePeplinkBalancefacilitatesinboundloadbalancing.Withthis
functionality,NS/SOADNSrecordsforadomainnamecanbedelegatedtotheInternetIPaddress(es)of
thePeplinkBalance.UponreceivingaDNSquery,thePeplinkBalancecanreturn(asan“A”record)the
IPaddressforthedomainnameonthemostappropriatehealthyWANconnection.Itcanalsoactasa
genericDNSserverforhosting“A”,“CNAME”,“MX”,“TXT”and“NS”records.

ThesettingsfordefiningtheDNSrecordstobehostedbythePeplinkBalancearelocatedat
Network>InboundAccess>DNSSettings.


https://www.peplink.com
106
Copyright@2019Peplink
