peplink ONE One - Page 174


MulticastRate
A

Thissettingspecifiesthetransmitratetobeusedforsendingmulticast
networktraffic.TheselectedProtocolandChannelBondingsettingswill
affecttherateoptionsandvaluesavailablehere.
IGMPSnooping
A

ToallowthePepwaveroutertolistentointernetgroupmanagementprotocol
(IGMP)networktraffic,selectthisoption.
DHCPRelay
PuttheaddressoftheDHCPserverinthisfield..
DHCPrequestswillberelayedtothisDHCPserver
DHCPOption82
A

IfyouuseadistributedDHCPserver/relayenvironment,youcanenablethis
optiontoprovideadditionalinformationonthemannerinwhichclientsare
physicallyconnectedtothenetwork.
Layer2Isolation
A

Layer2referstothesecondlayerintheISOOpenSystemInterconnect
model.
Whenthisoptionisenabled,clientsonthesameVLAN,SSID,orsubnetare
isolatedtothatVLAN,SSID,orsubnet,whichcanenhancesecurity.Traffic
ispassedtouppercommunicationlayer(s).Bydefault,thesettingis
disabled.
MaximumNumberof
Clients
Indicatethemaximumnumberofclientsthatshouldbeabletoconnectto
eachfrequency.
BandSteering
Toreduce2.4GHzbandovercrowding,APwithbandsteeringsteersclients
capableof5GHzoperationto5GHzfrequency.
Choosebetween:
ForceClientscapableof5GHzoperationareonlyofferedwith5GHz
frequency.
PreferClientscapableof5GHzoperationareencouragedtoassociate
with5GHzfrequency.Iftheclientsinsisttoattempton2.4GHzfrequency,
2.4GHzfrequencywillbeoffered.
DisableDefault
A
Advancedfeature.Clickthe buttononthetoprighthandcornertoactivate.


SecuritySettings
SecurityPolicy
Thissettingconfiguresthewirelessauthenticationandencryptionmethods.

https://www.peplink.com
174
Copyright@2019Peplink
