over the VPN with a selection of encryption standards, such as 3DES, AES-128, and AES-256.
To configure IPsec VPN on Pepwave devices that support it, navigate to Advanced>IPsec
VPN.
A NAT-Traversal option and list of defined IPsec VPN profiles will be shown. NAT-Traversal
should be enabled if your system is behind a NAT router. Click the New Profile button to
create new IPsec VPN profiles that make VPN connections to remote Pepwave, Cisco, or
Juniper routers via available WAN connections. To edit any of the profiles, click on its
associated connection name in the leftmost column.
To Next Page
Loading...
