Pepwave HD2 User Manual

If the PPTP server (see Section 19.2), SpeedFusion
TM
(see Section 12.1), or AP controller
(see Section 20) is enabled, you may see the corresponding connection name listed in the
Name field.
27.5 WINS Client
The WINS client list table is located at Status>WINS Client.
The WINS client table lists the IP addresses and names of WINS clients. This option will only
be available when you have enabled the WINS server (navigation:
Network>Interfaces>LAN). The names of clients retrieved will be automatically matched into
the Client List (see previous section). Click Flush All to flush all WINS client records.
27.6 UPnP / NAT-PMP
The table that shows the forwarded ports under UPnP and NAT-PMP protocols is located at
Status>UPnP/NAT-PMP. This section appears only if you have enabled UPnP / NAT-PMP as
http://www.peplink.com
187
Copyright @ 2017 Pepwave

Pepwave HD2 Specifications

General

Category	Network Router
Model	Pepwave HD2
WAN Ports	2
LAN Ports	4
Cellular Modems	2
Throughput	400 Mbps
Load Balancing	Yes
VPN	Yes
GPS	Yes
Wireless Standards	802.11a/b/g/n/ac
Ethernet Ports	4
Firewall	Yes
Cellular Connectivity	3G/4G LTE
VPN Support	IPsec, PPTP, L2TP