Name: Pepwave HD2
Brand: Pepwave
Rating: 5 (1 reviews)

To Next Page

To Previous Page

The Dashboard shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can change

WAN connection priority and switch on/off the Wi-Fi AP. For further information on setting up

these connections, please refer to Sections 8 and 9.

Device Information displays details about the device, including model name, firmware

version, and uptime. For further information, please refer to Section 22.

Important Note

Configuration changes (e.g. WAN, LAN, admin settings, etc.) will take effect only after clicking the Save button at

the bottom of each page. The Apply Changes button causes the changes to be saved and applied.

9 Configuring the LAN Interface(s)

9.1 Basic Settings

LAN interface settings are located at Network>LAN>Network Settings. Navigating to that

page will result in the following dashboard:

http://www.peplink.com

Questions and Answers:

Need help?

Do you have a question about the Pepwave HD2 and is the answer not in the manual?

Pepwave HD2 Specifications

General