Pepwave HD2 User Manual

26.4 Wake-on-LAN
Peplink routers can send special “magic packets” to any client specified from the Web UI. To access
this feature, navigate to System > Tools > Wake-on-LAN
Select a client from the drop-down list and click Send to send a “magic packet”
26.5 CLI (Command Line Interface Support)
The CLI (command line interface) can be accessed via SSH. This field enables CLI support.
The below settings specify which TCP port and which interface(s) should accept remote SSH
CLI access. The user name and password used for remote SSH CLI access are the same as
those used for web admin access.
http://www.peplink.com
181
Copyright @ 2017 Pepwave

Pepwave HD2 Specifications

General

Category	Network Router
Model	Pepwave HD2
WAN Ports	2
LAN Ports	4
Cellular Modems	2
Throughput	400 Mbps
Load Balancing	Yes
VPN	Yes
GPS	Yes
Wireless Standards	802.11a/b/g/n/ac
Ethernet Ports	4
Firewall	Yes
Cellular Connectivity	3G/4G LTE
VPN Support	IPsec, PPTP, L2TP