Pepwave HD2 User Manual

http://download.peplink.com/manual/IP67_Installation_Guide.pdf
8 Connecting to the Web Admin Interface
1. Start a web browser on a computer that is connected with the Pepwave router through the
LAN.
2. To connect to the router’s web admin interface, enter the following LAN IP address in the
address field of the web browser:
http://192.168.50.1
(This is the default LAN IP address for Pepwave routers.)
3. Enter the following to access the web admin
interface.
Username  :  admin
Password  :  admin
(This is the default username and password for
Pepwave routers. The admin and read-only user
passwords can be changed at  System>Admin
Security  .)
4. After successful login, the Dashboard will be displayed
http://www.peplink.com
42
Copyright @ 2017 Pepwave

Pepwave HD2 Specifications

General

Category	Network Router
Model	Pepwave HD2
WAN Ports	2
LAN Ports	4
Cellular Modems	2
Throughput	400 Mbps
Load Balancing	Yes
VPN	Yes
GPS	Yes
Wireless Standards	802.11a/b/g/n/ac
Ethernet Ports	4
Firewall	Yes
Cellular Connectivity	3G/4G LTE
VPN Support	IPsec, PPTP, L2TP