25.10 Feature Add-ons
Some Pepwave routers have features that can be activated upon purchase. Once the
purchase is complete, you will receive an activation key. Enter the key in the Activation Key
field, click Activate, and then click Apply Changes.
25.11 Reboot
This page provides a reboot button for restarting the system. For maximum reliability, the
Pepwave router can equip with two copies of firmware. Each copy can be a different version.
You can select the firmware version you would like to reboot the device with. The firmware
marked with (Running) is the current system boot up firmware.
Please note that a firmware upgrade will always replace the inactive firmware partition.
26 Tools
26.1 Ping
The ping test tool sends pings through a specified Ethernet interface or a SpeedFusion
TM
VPN
connection. You can specify the number of pings in the field Number of times, to a maximum
number of 10 times. Packet Size can be set to a maximum of 1472 bytes. The ping utility is
located at System>Tools>Ping,
illustrated below:
To Next Page
Loading...
Need help?
General
