The host name assigned to the Pepwave router appears here.
This shows the length of time since the device has been rebooted.
This shows the current system time.
The Download link is for exporting a diagnostic report file required for system investigation.
Click Turn on to enable remote assistance.
The second table shows the MAC address of each LAN/WAN interface connected. To view
your device’s End User License Agreement (EULA), click .
If you encounter issues and would like to contact the Pepwave Support Team (http://www.pepwave.com/contact/),
please download the diagnostic report file and attach it along with a description of your issue.
In Firmware 5.1 or before, the diagnostic report file can be obtained at System>Reboot.
27.2 GPS Data
The MAX HD2 and HD2 IP67 automatically store up to seven days of GPS location data in
GPS eXchange format (GPX). To review this data using third-party applications, click
Status>
Device
and then download your GPX file.
The Pepwave MAX BR1, HD2, and HD2 IP67 export real-time location data in NMEA format
through the LAN IP address at TCP port 60660. It is accessible from the LAN or over a
SpeedFusion connection. To access the data via a virtual serial port, install a virtual serial port
driver. Visit http://www.peplink.com/index.php?view=faq&id=294 to download the driver.
27.3 Active Sessions
Information on active sessions can be found at Status>Active Sessions>Overview.
To Next Page
Loading...
Need help?
General
