From the drop-down menu, choose whether you are going to define the client(s) by
an IP Address or a Subnet. If IP Address is selected, enter a name defined in DHCP
reservation table or a LAN client's IP address. If Subnet is selected, enter a subnet
address and specify its subnet mask.
This field is to define which User Group the specified subnet / IP address belongs to.
Once users have been assigned to a user group, their internet traffic will be restricted by rules
defined for that particular group. Please refer to the following two sections for details.
18.2 Bandwidth Control
You can define a maximum download speed (over all WAN connections) and upload speed
(for each WAN connection) that each individual Staff and Guest member can consume. No
limit can be imposed on individual Manager members. By default, download and upload
bandwidth limits are set to unlimited (set as 0).
To Next Page
Loading...
Need help?
General
