Pepwave HD2 - SpeedFusion Status

mentioned in Section 16.1.1.
Click to delete a single UPnP / NAT-PMP record in its corresponding row. To delete all
records, click Delete All on the right-hand side below the table.
Important Note
UPnP / NAT-PMP records will be deleted immediately after clicking the button  or Delete All, without the
need to click Save or Confirm.
27.7 SpeedFusion Status
Current SpeedFusion
TM
status information is located at Status>SpeedFusion
TM
.
Details about SpeedFusion
TM 
connection peers appears as below:
Click on the corresponding peer name to explore the WAN connection(s) status and subnet
information of each VPN peer.
http://www.peplink.com
188
Copyright @ 2017 Pepwave