Pepwave HD2 - Remote User Access

RIPv2 Settings
Authentication
Choose an authentication method, if one is used, from this drop-down menu. Available
options are MD5 and Text. Enter the authentication key next to the drop-down menu.
Interfaces
Determine which interfaces this group will use to listen to and deliver RIPv2 packets.
21 Remote User Access
a Networks routed by a Peplink Balance can be remotely accessed via L2TP with IPsec or
PPTP. To configure this feature, navigate to Network > Remote User Access
http://www.peplink.com
130
Copyright @ 2017 Pepwave